Used Ncase M1 V5 w/ original box

Description

Used Case. Includes mounting brackets, filters, screws, case feet and original box.
Revision 5.
NCASE M1 Mini-ITX Case Specifications
Dimensions:
240mm x 160mm x 328mm, 12.6L (250mm x 160mm x 338mm overall)
Motherboard support:
Mini-ITX, Mini-DTX
Liquid cooling support:
Single 120mm or 240mm slim radiator
Power Supply:
SFX, ATX (limited)
Drives:
3 x 3.5″ Mounts:
1 on case floor
2 in removable side bracket (cannot be used with dual radiator)
3 x 2.5″ Mounts:
1 inside chassis front
1 behind front panel (in place of optical drive)
1 on case bottom (in place of 3.5″ drive)
Included double-stacking bracket allows 2 x 2.5″ drives on one mount (depending on drive thickness)
Disc Drive:
Slim slot-load optical drive bay
Fans:
4 120mm fan mounts
2 on side bracket
2 on case bottom (in place of 3.5″ drive)
1 x 80/92mm fan mount (bottom)
1 x 80/92mm fan mount (rear)
Front ports:
2 x USB 3.0, HD Audio
Power button:
Red/blue power/drive activity LED
Material:
1.5mm aluminum construction, anodized brushed exterior, painted interior
NCASE M1 Mini-ITX Case Compatibility
CPU Cooler
Top-down coolers are recommended.
Height restriction: 130mm
Cooler cannot extend past the top of the board by more than 10mm. For many larger coolers, this limits motherboard choice to those with centrally-located sockets.
Large coolers that extend past the front of the board will prevent the 3.5″ HDD cage from being used.
Watercooling
Sealed liquid coolers or integrated pump/block and radiator/res recommended.
Single 120mm or 240mm radiators only.
Thinner radiators only (under 40mm).
Fans in push/pull are not recommended due to space constraints.
Graphics Card
Rear exhaust cards recommended.
Max length: 12.5″ (slots 1 & 2), 11″ (slot 3)
Max width:
For cards up to 12.5″ or cards in the third slot: 4.4″
For cards up to 11.5″ in the first or second slot: 5.5″ (4.7″ at the PCIe power connectors)
Power supply
SFX PSU support is standard
ATX PSU support is possible using the included bracket with the following limitations:
-Cannot be used with the dual 3.5″ HDD cage or 240mm radiator mounted to the side bracket (120mm radiator is still possible over the motherboard area)
-Cannot be used with long GPUs (over 195mm), with the exception of 140mm or shorter non-modular PSUs (not recommended due to cable length)
-The AC inlet orientation on some ATX power supplies (e.g. Seasonic) may prevent the angle plug from fitting, please check carefully.