-40%
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5
ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5

ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5"Nextion(incl)

$ 42.23

Availability: 42 in stock
  • PSU Included: No
  • Item must be returned within: 30 Days
  • Brand: C4Labs
  • Country/Region of Manufacture: United States
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: ZEB-NEXT-3.5SCRN-BLKICE
  • Form Factor: Raspberry Pi
  • Color: Black
  • Product Line: C4Labs
  • Case Material: Acrylic, Stainless Steel
  • Condition: New
  • All returns accepted: Returns Accepted
  • Case Type: Small Form Factor Case
  • Return shipping will be paid by: Seller

    Description

    A Case Kit and Screen: For the Raspberry Pi 4B, 3B+,  3B, 2B, and B+ (Not included),
    ZUMspot brand MMDVM (Not included), and a
    3.5″ Enhanced Nextion Screen (included).
    ***
    Note:
    This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures
    .***
    If you have a Generic Chinese MMDVM Board (Jumbospot) there is a new case model: JRPI-3.5NSX
    For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), ZUMspot Brand MMDVM Board (Not included), and a 3.5″ Enhanced Nextion Screen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.
    Includes a 3.5″ Enhanced Nextion screen*
    Cut outs for easy access to SD card and ports
    The new inner layers have been designed to fit the
    Pimoroni Fan SHIM
    (not included)
    *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions. The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)*
    The
    Nextion Enhanced NX4832K035
    is a powerful 3.5″ HMI TFT display, with 32MB Flash data storage space, 1024 byte EEPROM, and  8192 byte RAM:
    supports built-in RTC
    supports save data to Flash
    supports GPIO
    larger flash capacity
    larger CPU clock
    Notes on fit of Pimoroni Fan Shim (not included)
    The clearance between the fan shim (not included) and most radio boards is very slim and not all boards will work with the fan shim if there are components or solder points above the fan.
    The fan shim has been tested to work with the Zumspot versions 0.4, 0.5, 0.6 as long as there is no previous solder left over from an OLED screen.
    The fan shim does NOT work with the N5BOC Lonestar Board
    ***
    Made at our shop in the state of Washington, USA!
    C4LABS IS DEDICATED TO PROVIDING THE VERY BEST CASES AND CUSTOMER SERVICE IN THE INDUSTRY